• Free Delivery
  • No Credit Checks
  • £0 Maintenance Costs

Bosch WAA Washing Machine Error Lights

Bosch WAA Washing Machine Error Lights

Fault Code 1 – Heating time exceeds 105 minutes. 

This error code means that the water isn’t reaching the required temperature set by the user. In most cases the fault will be with the heater element and it will need replacing.
If the problem still continues, please follow this link to our Washing Machine and Tumble Dryer Rental page.

Fault Code 2 – Motor fault.

2

This fault code means that the motor isn’t turning and will therefore mean that the problem lies within the motor circuit likely to be the carbon brushes, a faulty motor, or motor control module.
If the problem still continues, please follow this link to our Washing Machine and Tumble Dryer Rental page.

Fault Code 3 - Door not closed.

3

This fault means that the door isn’t closed properly, or there is a problem with the door latching mechanism, or the door interlock.
If the problem still continues, please follow this link to our Washing Machine and Tumble Dryer Rental page.

Fault Code 4 - Unexpected heating. 

4

This fault is not a common Bosch washing machine error code. It means that the heating circuit has been activated at a stage of the wash cycle where it shouldn’t have.
If the problem still continues, please follow this link to our Washing Machine and Tumble Dryer Rental page. 

Fault Code 5 – Washing machine is not filling with water.
5

This fault code will normally indicate that the water supply valve is switched off, the inlet hose is kinked, or the water inlet valve has failed.
If the problem still continues, please follow this link to our Washing Machine and Tumble Dryer Rental page. 

Fault Code 6 – Washing machine takes longer than 6 minutes to empty.
6

This fault code indicates that water is unable to drain from the machine at the end of a cycle. Normally it will mean that you have a blockage or the drain pump is faulty. For further help see our guide on MY WASHING MACHINE NOT SPINNING OR DRAINING

Fault Code 7 – NTC thermistor open or short circuit.
7

NTC is a temperature sensor, so this fault means that either the NTC or the wiring to it is faulty.
If the problem still continues, please follow this link to our Washing Machine and Tumble Dryer Rental page.

Still need help? Please send a message or call 01206 794905 to discuss with an agent.

Added by: Alistair Gorbutt

Added in: Washing Machine Support Bosch Washing Machine Faults

Recently Added

Beko Tumble Dryer Fault Lights

Beko Tumble Dryer Fault Lights

Added by: Alistair Gorbutt

Bosch Tumble Dryer Fault Codes

Bosch Tumble Dryer Fault Codes

Added by: Alistair Gorbutt

Hotpoint Tumble Dryer Fault Codes

Hotpoint Tumble Dryer Fault Codes

Added by: Alistair Gorbutt