• Free Delivery
  • No Credit Checks
  • £0 Maintenance Costs

Zanussi Washing Machine Error Codes

Zanussi Washing Machine Error Codes

Identifying Zanussi Washing Machine Error Codes


Error codes on Zanussi washing machines will be displayed in two different ways. If your machine has an LCD display you’ll see the letter E (E is for Error) followed by two numbers.

If your machine has no LCD display however, combinations of LEDs on your machine will flash.

- On some machines the Start/Pause button LED will intermittently flash between green and red. Count the flashes. The red flashes indicate the first number the green flashes indicate the second number. For example if there are two red flashes and four green flashes the fault code the washing machine is showing is E24, a problem with draining the water.

- On some machines the Start/Pause button LED and End of cycle LED will flash, pause, and then flash again. Count the number of flashes between each pause for both LEDs. The number of flashes on the End of cycle LED indicates the first fault code number the number of flashes on the Start/Pause LED indicates the second fault code number. For example if the End of Cycle LED flashes twice and the Start/Pause LED flashes four times your machine is displaying fault code E24.

E11 - Water inlet issue.

Issue: If your Zanussi washing machine is not filling with water as it should be, fault E11 will be displayed. In order to diagnose washing machine filling problems you’ll need to check the hose which lets water into your machine (the inlet hose) is correctly connected and not squashed. This fault could also be caused by a faulty water inlet valve (the valve that lets water into your machine) or the water supply to your machine not being switched on enough.
Advice: Check the water inlet pipe is not kinked, and check the water inlet tap is on.
Fix: 
If the above advice has not worked, then there may not be an easy fix for this fault. Please follow this link to our Washing Machine and Tumble Dryer Rental page.

E13 - Leaking issue.
Issue: The E13 error code indicates a leak on your machine. If your model of Zanussi machine has a water leak detection system you may see this error. You’ll need to find the cause of the leak, remove water from the base and fix the leak to clear this fault.
Fix: There may not be an easy fix for this fault. Please follow this link to our Washing Machine and Tumble Dryer Rental page.

E21, E23 or E24 - Blockage or drainage issue
Issue: E2* fault codes relate to washing machine draining problems.
Advice: For all three fault codes, E21, E23 and E24, check there are no blockages in the filter or pump, check the pump itself and its wiring and connections and check there are no blockages in the pipe or spigot under the sink which connects to the drain hose sometimes gunk can build up there and stop washing machines from draining properly.
Fix: If the issue still continues after the advice above has been followed, then it may not be an easy repair. Please follow this link to our Washing Machine and Tumble Dryer Rental page.


E33, E35, E36, E37 or E39 - Pressure switch issue.
Fault:
Water keeps filling in the drum, and does not stop. All E3* error codes have to do with the pressure switch, the part in your washing machine that monitors the amount of water in the drum. The switch itself could be faulty or the hose and chamber which lead to the switch could be blocked which is quite a common problem.
Fix: There may not be an easy fix for this fault. Please follow this link to our Washing Machine and Tumble Dryer Rental page.

E40, E41, E42, E43, E44 or E45 - Door lock issue.

Issue: If the error code on your machine begins E4* it indicates a problem with the door lock. You’ll need to check the door lock itself and the wiring and connections between the door lock and the main control board to get to the bottom of this series of faults.
Fix: There may not be an easy fix for this fault. Please follow this link to our Washing Machine and Tumble Dryer Rental page.

E51, E52, E53 or E54 - Motor Issue

Issue: E5* Zanussi washing machine error codes relate to faults with the motor in your washing machine. You’ll need to check the motor itself, motor brushes and wiring and connections to the motor to get to the bottom of a motor fault. Here’s what each individual fault indicates:
Fix: There may not be an easy fix for this fault. Please follow this link to our Washing Machine and Tumble Dryer Rental page.

E61, E62, E66 or E71 - Machine not heating issue. 

Issue: E6* or E7* fault codes relate to a problem with the heating system in your Zanussi washing machine. You’ll need to check the heating element, the temperature sensor and the connections and wiring to both. Each fault relates to a specific problem with the heating system.
Fix: There may not be an easy fix for this fault. Please follow this link to our Washing Machine and Tumble Dryer Rental page.

E82, E83, E93, E94, E95, E96 or E97 - Main control board issue.

Issue: E8* and E9* error codes relate to a programming fault in your machine’s control board. Many Zanussi modules are ‘configured’ using a combination of button presses to match your machine, if you see one of these faults we recommend contacting a Zanussi agent directly to enlist one of their engineers to fix your machine.
Fix: There may not be an easy fix for this fault. Please follow this link to our Washing Machine and Tumble Dryer Rental page.

Still need help? Please send a message or call 01206 794905 to discuss with an agent.

Added by: Alistair Gorbutt

Added in: Washing Machine Support Zanussi Washing Machine Faults

Recently Added

Beko Tumble Dryer Fault Lights

Beko Tumble Dryer Fault Lights

Added by: Alistair Gorbutt

Bosch Tumble Dryer Fault Codes

Bosch Tumble Dryer Fault Codes

Added by: Alistair Gorbutt

Hotpoint Tumble Dryer Fault Codes

Hotpoint Tumble Dryer Fault Codes

Added by: Alistair Gorbutt